LI6Y2GFC2G11Y
LI6Y2GFC2G11Y super-flexible control and signal cable with FEP insulation, silicone rubber layers, a CuSn shield, and a polyurethane outer jacket. OEM version made to special order; the specified parameters apply to a documented cross-sectional area of 0.50 mm².
Key Parameters
- Operating temperature
- −50 °C to +80 °CLI6Y2GFC2G11Y 0.50 mm² — OEM version
- Operating voltage
- 600 V ACLI6Y2GFC2G11Y 0.50 mm² — OEM version
- Test voltage
- 6,000 V ACLI6Y2GFC2G11Y 0.50 mm² — OEM version
- Minimum bending radius — static loading
- 7.5 × the cable's outer diameterLI6Y2GFC2G11Y 0.50 mm² — OEM version
- Minimum bending radius — dynamic service
- 15 × the cable's outer diameterLI6Y2GFC2G11Y 0.50 mm² — OEM version
- Screen Cover
- At least 85%LI6Y2GFC2G11Y 0.50 mm² — OEM version
Construction
Highly flexible bare copper conductor Cu-ETP1 in accordance with EN 13602. White FEP insulation. Blue silicone rubber layer. Braid made of tinned copper wires with a coverage of at least 85%. Red silicone rubber layer. Black outer sheath made of thermoplastic polyurethane.
Properties
Very high flexibility at low temperatures.
Application
Measurement, control, and electronic systems in advanced power engineering that require high flexibility and are exposed to fluctuating temperatures and chemical environments.
Technical Tables
0.50 mm² version
| Conductor cross-sectional area [mm²] | Conductor construction [n × mm] | Nominal FEP insulation thickness [mm] | Diameter of the conductor in FEP insulation [mm] | Outer diameter of the cable [mm] |
|---|---|---|---|---|
| 0,50 | 133 × 0,07 | 0,58 | 2,15 ± 0,10 | 8,00 ± 0,20 |
Other conductor cross-sections and configurations are available upon request.